Perseverance Metals (TSXV:PMI) Announces Positive Assay Results from Lac Gayot Project

Vancouver, British Columbia — January 8, 2026 — Leads & Copy — Perseverance Metals Inc. (TSXV: PMI) has released assay results from six additional diamond drill holes (BAS-25-003 to 008) at the Baseline Zone Discovery, part of the Lac Gayot project in northern Québec. The results include a 2.1m intersection of massive sulphides.

The drilling targeted Ni-Cu-Co-PGE magmatic sulphide mineralization within the 6km long by 2km wide Venus East Mineralized Trend. The first two holes from Baseline, including discovery hole BAS-25-002, were reported in the Nov 5, 2025 PMI News Release.

Hole BAS-25-004 intersected 2.1m of massive magmatic sulphides, yielding 4.03% Ni, 0.69% Cu, 0.12% Co, and 1.79 g/t Pd. This intersection is 25 metres along strike from discovery hole BAS-25-002.

BAS-25-003, drilled ~25 metres up-dip from BAS-25-004, encountered 3.39% Cu, 2.06% Ni, 0.35% Co, 1.62 g/t Pd, 0.20 g/t Pt and 0.32 g/t Au over a 0.50 metre interval of massive sulphide, within a broader 1.31m intersection of 1.39% Cu, 1.31% Ni, 0.15% Co, 0.90g/t Pd, 0.13g/t Pt and 0.14g/t Au.

Multiple conductors interpreted in downhole borehole EM (“BHEM”) surveys correlate strongly to the massive sulphide drill intersections documented in the Baseline Zone. These conductors extend along-strike +100m NE and +60m SW from the area drilled.

The Baseline Zone has now been established as an at least 1.3km long trend of fertile ultramafic rocks with airborne and ground EM conductive targets within the 6km by 2km Venus East Ni-Cu-Co-PGE Mineralized Trend extending NE from the southern to northern Baseline Zone drill intersections.

Historical results*1 from the ‘L’ and De Champlain Zones include:

‘L’ Zone (2000 drilling, BHP)*1: 2.2% Ni, 1.6% Cu & 2.4 g/t PGEs over 11.4 metres
– including 6.2% Ni, 0.9% Cu & 5.9 g/t Pt+Pd+Au over 1.9 metres

De Champlain Zone (2000 trenching, BHP)*1: 1.9% Ni, 0.3% Cu & 1.0 g/t Pt+Pd over 2.0 metres
– including 10.0% Ni, 0.3% Cu & 4.5 g/t Pt+Pd over 0.3 metres

According to Michael Tucker, CEO, the company believes in the potential of the Venus East Trend to host a high-grade Ni-Cu-Co-PGE deposit.

The Baseline drill target was initially identified as a strong subsurface (blind) conductor detected during the Company’s 2024 Helitem2 airborne survey, 600 metres SW of a nickel sulphide-mineralized boulder. Ground-truthing of these conductors did not reveal surface mineralization, but a moving loop SQUID EM survey conducted in the summer of 2024 confirmed the airborne conductor location, with the resulting 3,000 Siemen per metre (“S/m”) conductive plate becoming the initial Baseline conductor shallow drill target.

Holes BAS-25-001 and 002 early in the summer/fall 2025 program both intersected Ni-Cu-Co-PGE mineralization correlating to this plate. Subsequent BHEM surveys within these two holes led to the modelling of a 200m long, 7,000 S/m plate trending to the NE, which became the target of follow up holes BAS-25-003, 004, 005, and 008. Final BHEM modelling further increased the conductance of the Maxwell plate to 10,000 S/m and indicates extensions along strike over 100m to the NE and over 60m to the SW from current drilling.

The magmatic massive sulphide mineralization at the Baseline Zone appears to be a lens that loosely tracks the contact of an ultramafic unit. The longitudinal section illustrates the trend of the zone shallowing to the NE and plunging the SW – an orientation that is supported by the geophysical model. In 2026, step-out drilling will be directed at testing down-plunge of the massive sulphide mineralization and will be continuously guided by BHEM data with the goal of vectoring towards the source of deposition as well as zones of structural thickening of massive sulphide lenses.

A high-resolution ground SQUID (Superconducting Quantum Interference Device) EM survey will be conducted in early 2026 over the entire Venus East Trend. This will include the Baseline and five other mineralized zones identified to date, with the goal of identifying additional conductive targets for the spring/summer 2026 drill campaign, which will focus on the Venus East Trend of the Lac Gayot project.

Baseline Zone 2026 drill results – Significant Assays

Table 1: Significant assay results from the Baseline Zone.’*2′ indicates previously reported results, see PMI News Release Nov 5 2025] Note to Table 1: At this point in time, thicknesses and orientations of mineralized zones are still being understood, as a result, intersections are not necessarily indicative of the true width of the zone. However, given the dip of stratigraphy and orientation drilled, it is expected that the intersections are between 60-100% of true thickness

*1 Drill results for “L” Zone drill hole GA00-23B are sourced from assessment report GM 58741 prepared by BHP (2000). De Champlain trench results from the ‘fall 2000 trench’ sourced from assessment report GM 58440 prepared by BHP (2000). These results are historical in nature and have not been verified by the Company. Further exploration is required to verify the historical results, and they may not be indicative of mineralization of the Lac Gayot project. For further information on historical exploration completed at the Lac Gayot project, see the Company’s technical report titled “NI 43-101Technical Report, Lac Gayot Ni-Cu-PGE project, Quebec” prepared by Claude Duplessis and dated September 10, 2025, which is available on SEDAR+ (http://www.sedarplus.ca).

Table 2: Baseline drill hole collar locations and orientations. Coordinates are in UTM Nad 83, Zone 19

Drill core description and sampling were completed by Laurentia Exploration. The quality assurance and quality control protocols include insertion of blank and standard samples in the sampling. ALS Minerals is independent from the Company.

Hugues Guérin-Tremblay, P. Geo (OGQ #1584), a Qualified Person under National Instrument 43-101, reviewed and approved the technical and geological information in the news release.

Perseverance Metals is a critical minerals explorer with projects in North American Ni-Cu-Co-PGE and hard rock lithium regions.

Michael J. Tucker, CEO
mtucker@perseverancemetals.com
+1 (778) 834-3528

John Foulkes, President
jfoulkes@perseverancemetals.com
+1 (604) 614-2999

Source: Perseverance Metals

×

Welcome!

Biotech Reporter is the source most up-to-date real-time, direct-from-source News Tips and Story Leads.

By Subscribing you will receive Daily Biotech Update each day at 9:30 am ET (Market Open) in your inbox and you can unsubscribe any time.