Core Silver (CSE:CC) Expands Laverdiere Copper Project with 280-Metre Mineralization Extension

VANCOUVER, BC — January 20, 2026 — Leads & Copy —

Core Silver Corp. (CSE:CC)(FSE:8ZR)(OTCQB:CCOOF) has released visuals and geological highlights from drill hole LAV25-013, the final of four deep exploratory diamond drill holes completed during the 2025 season at the Laverdiere Copper Project, located on the eastern Blue Property in the Atlin Mining District, northwestern British Columbia.

The 2025 exploration campaign was designed to test the depth potential and continuity of a large (5 km x 8 km) multi-phase Cu-Mo-Ag±Au porphyry system through diamond drilling, detailed structural mapping, and surface sampling. In total, seven drill holes were completed across five key target areas along the Valley Fault Zone, for a combined 3,857 metres drilled.

Drill hole LAV25-013, designed to test the depth extent and lateral continuity of copper-bearing zones, was drilled at a moderate dip to the southeast to a final depth of 1088.4 metres, targeting northwest dipping porphyry veining proximal to the Valley Fault Zone.

Core Silver’s President and CEO Nick Rodway said LAV25-013 is a substantial advancement for the Laverdiere Copper Project. Rodway said this hole confirms that the company is dealing with a very large porphyry system, with strong mineralization across meaningful scale. He added that the system is clearly open, and the company is only beginning to unlock the full potential of the Laverdiere Porphyry.

LAV25-013 Highlights:

  • A 280-metre step-out confirms expansion of the Laverdiere Porphyry System at the Valley Zone, with zones of Cu-Mo mineralization intersected from surface to over 1,050 metres depth in LAV25-013.
  • Strong porphyry-style alteration and mineralization persist at depth, including widespread molybdenite with increasing chalcopyrite and local bornite, indicating proximity to a large and fertile porphyry centre.
  • Mineralization at Laverdiere is now defined over approximately 675 metres between 2025 drill holes and 2.3 kilometres between the Valley and Main Zones, highlighting exceptional system continuity.
  • Near-surface and deep mineralization trends remain open, with porphyry Cu-Mo mineralization traceable over a 4.5-kilometre by 3.1-kilometre footprint.
  • Results reinforce the presence of a large, multi-phase porphyry system, with multiple vectors supporting further expansion through follow-up drilling.
  • Results from the 2025 project-wide soil geochemical survey are expected in the coming weeks. Assay results from 2025 diamond drilling remain pending.

LAV25-013 was collared 280 metres northwest of drillholes LAV25-011 and 010 into an intensely hematite±biotite±magnetite altered phase of the Laverdiere Porphyry. This zone contains high epithermal and molybdenite-pyrite-dominant porphyry vein densities that persist to approximately 515 metres drilled depth. Near 350 metres depth, chalcopyrite content increases in porphyry veining with spotty bornite within narrow, well-developed zones of variably altered porphyry. These mineralized zones were drilled intermittently to drilled depths exceeding 1,050 metres, alternating with zones of late-to-post-mineral porphyry.

The Laverdiere Copper Project is a low-elevation, drill-permitted, early-stage high-grade Cu-Mo-Ag-Au porphyry-skarn Target that has been sporadically explored since the early 1900s. At Laverdiere, an extensive Cretaceous granodiorite intrusion hosts widespread Cu-Mo-Ag porphyry mineralization. The intrusion is associated with a very high-grade Fe-Cu-Au-Ag massive sulphide skarn occurrence (the “Main Zone”) that is exposed at surface along the western flank of the prolific Llewellyn Fault Zone (LFZ) at the porphyry-marble contact.

Core Silver’s 2025 exploration campaign was designed to test the depth potential and continuity of a large (5km x 8km) multi-phase Cu-Mo-Ag±Au porphyry system through diamond drilling, detailed structural mapping, and surface sampling. Seven drill holes were completed across five key target areas along the Valley Fault Zone for a combined 3,857 metres drilled in 2025. All assays from the 2025 diamond drilling program are pending.

All 2025 rock and drill core samples were transported by helicopter at the end of each field day to the core logging facility in Atlin, BC for processing. Field samples were chosen to capture homogenous lithology, alteration, mineralization, and veining. All rock and drill core samples are submitted to Bureau Veritas (BV) Labs in Whitehorse, YT. For drill core, blanks and certified reference standard materials were inserted for every 20 core samples.

Soil samples collected in 2025 were also transported by helicopter at the end of each field day. Samples were photographed in the field and sample descriptions including sample number, location, elevation, color, saturation, depth of sample and soil horizon. Samples were dried in kraft sample bags on-site prior to being batched for shipment to BV Labs in Whitehorse, YT. There, each sample is dried at 60°C and sieved to pass -180 µm (80 mesh). All samples then undergo an aqua regia extraction with an ICP-ES/MS finish for a 36-element package (Method Code AQ200).

Nicholas Rodway, P.Geo, CEO and Director of Core Silver, and qualified person as defined by National Instrument 43-101- Standards of Disclosure for Mineral Projects, has supervised the preparation, verified and approved the technical content in this release.

Contact:
Nicholas Rodway, President & CEO
Tel: 604.681.1568

Source: Core Silver Corp.

×

Welcome!

Biotech Reporter is the source most up-to-date real-time, direct-from-source News Tips and Story Leads.

By Subscribing you will receive Daily Biotech Update each day at 9:30 am ET (Market Open) in your inbox and you can unsubscribe any time.