Toronto, Ontario — December 18, 2025 — Leads & Copy —
ATEX Resources Inc. (TSXV: ATX) (OTCQB: ATXRF) has announced the full results for the initial Phase VI drill hole ATXD25C and partial results for drill hole ATXD26B from the Valeriano Copper-Gold Project in Atacama Region, Chile.
Drilling commenced in September, with six rigs operational on site, achieving half of the 25,000 meters guided for Phase VI. Assay laboratory turnaround times are longer than anticipated due to seasonal demand. Results will be released as they are received.
According to Ben Pullinger, President and CEO of ATEX, initial results for drill hole ATXD26B have delivered another high-grade intercept in the B2B Zone, demonstrating the potential to enlarge this target. Phase VI drilling at the B2B Zone is improving the understanding of the high-grade system and confirming potential for growth beyond the 2025 Mineral Resource Estimate. The program has surpassed expected productivity numbers with 12,550m already completed and over 6,500m of samples currently at the lab.
ATXD26B intersected 54 meters of 2.50% copper equivalent (1.58% copper, 0.88 g/t gold) within broader intervals of 146m of 2.00% copper equivalent (1.30% copper, 0.67 g/t gold) and 224m of 1.52% copper equivalent (1.02% copper, 0.49 g/t gold).
Logged breccia mineralization intersected in ATXD26B is anticipated to extend the current limits of the B2B Zone by 100 meters down dip.
Chalcopyrite and bornite mineralization with associated brecciation, characteristic of the B2B Zone was intersected from approximately 1,050m to 1,400m downhole, before entering well mineralized early porphyry associated with the high-grade trend until the end of the hole.
Over 600m of assay results for ATXD26B are outstanding with full results anticipated in January.
Finalized assays from ATXD25C resulted in an improved intercept of 164m of 2.77% copper equivalent (1.69% copper, 0.97 g/t gold, 5.5 g/t silver, 43 g/t molybdenum) vs. 2.72% copper equivalent previously, including 86m of 3.84% copper equivalent (2.28% copper, 1.41 g/t gold, 7.9 g/t silver, 48 g/t molybdenum) vs. 3.77% copper equivalent previously, and 40m of 4.83% copper equivalent (2.76% copper, 1.88 g/t gold, 10 g/t silver, 43 g/t molybdenum) vs. 4.73% copper equivalent previously, starting at 1,558m downhole.
The reported intervals are contained within a broader intercept of 584m at 1.27% copper equivalent (0.83% copper, 0.39 g/t gold, 2.2 g/t silver, 65 g/t molybdenum) from 1,302m downhole.
Results exceed the average B2B Zone grade estimated in the 2025 MRE highlighting upside.
The horizontal width of approximated 170m is indicative of thick, continuous mineralization underscoring the potential for increase in material and tonnage in the area of this hole.
The Phase VI drill program has six diamond drill rigs currently active on site and has already achieved half of the targeted 25,000 metres of exploration drilling prioritizing the high-grade B2B Zone and similar nearby high-grade breccia targets. Details of drill holes currently in progress as part of the ongoing exploration program are provided below. Assay results will be reported as they are finalized and received from the laboratory.
ATXD31A is evaluating northwest lateral continuity at the lower elevation of B2B Zone, with the potential to extend into the high-grade core of the porphyry system. ATXD32 is testing the B2B Zone approximately 65m north of ATXD23A to confirm high-grade mineralization along strike. ATXD25D is testing the northwest strike extension of the B2B Zone, in the upper part of the breccia system.
ATXD34A is testing a B2B-like target, “B3B”, for potential high-grade mineralization 130m to the east of B2B. ATXD35 is testing B3B for potential high-grade mineralization to the east of the B2B Zone.
ATXD30 is testing B2B-like mineralization labeled “B4B” at the northern border limits. The drill hole is approximately 600 metres to the northeast of the B2B Zone. ATXD36 is designed to evaluate a newly defined magnetic anomaly labeled “B5B”, targeting a potential breccia body located northeast of ATXD30. ATXD33 is targeting an untested B2B-like geophysical anomaly to the southeast, which is approximately 1 km from the mineralized center.
Drill holes are collared with a PQ drill bit, reduced to HQ and, sequentially, to NQ as the drill holes progressed deeper. Drill core produced by the drill rigs was extracted from the core tubes by the drill contractor under the supervision of ATEX employees, marked for consistent orientation and placed in core boxes with appropriate depth markers added. Full core boxes were then sealed before being transported by ATEX personnel to the Valeriano field camp. Core at the field camp is processed, quick logged, checked for recovery, photographed, and marked for specific gravity, geotechnical studies and for assays. From camp, the core is transferred to a secure core-cutting facility in Vallenar, operated by IMG, a third-party consultant. Here, the core trays are weighed before being cut using a diamond saw under ATEX personnel oversight. ATEX geologists working at this facility double-check the selected two-metre sample intervals, placing the samples in seal bags and ensuring that the same side of the core is consistently sampled. Reference numbers are assigned to each sample and each sample is weighed. The core trays with the remaining half-core are weighed and photographed. Additionally, core logs are updated, and specific gravity and geotechnical samples are collected. The remaining core is stored in racks at the Company’s secure facility in Vallenar.
From Vallenar samples are sent to an ALS preparation facility in Copiapo. ALS is an accredited laboratory which is independent of the Company. The prepared samples were sent to the ALS assay laboratories in either Santiago, Chile or Lima, Peru for gold (Au-AA24), copper (Cu-AA62), molybdenum (Mo-AA62) and silver (Ag-AA62) assays as well as and multi-element ICP (ME-MS61) analysis. No data quality problems were indicated by the QA/QC program.
Mr. Ben Pullinger, P.Geo., President and CEO of ATEX, is the Qualified Person for the Valeriano Copper Gold Porphyry Project. He has reviewed and approved the disclosure of the scientific and technical information contained in this press release.
ATEX is exploring the Valeriano Copper-Gold Project located in the Atacama Region, Chile. Valeriano hosts a large, high-grade, copper-gold porphyry Mineral Resource: an Indicated Resource of 475 Mt at 0.88% CuEq (0.58% Cu, 0.25 g/t Au, 1.39 g/t Ag and 70.4 g/t Mo) at a cutoff grade of 0.35% Cu, and an Inferred resource of 1,511 Mt at 0.75% CuEq (0.50% Cu, 0.20 g/t Au, 1.16 g/t Ag and 70.6 g/t Mo) at a cut-off grade of 0.35% Cu, as reported on September 23, 2025.
Ben Pullinger,
President and CEO
Email: bpullinger@atexresources.com
Aman Atwal,
Vice President, Business Development and Investor Relations
Email: aatwal@atexresources.com
1-647-398-9405
Source: ATEX Resources Inc.