Arbor Metals Corp. (TSXV:ABR) Announces Assay Results from Jarnet Lithium Project

Vancouver, Canada — January 15, 2026 — Leads & Copy —

Arbor Metals Corp. has announced assay results from its 2025 Phase 3 diamond drilling program at its wholly owned Jarnet Lithium Project, located in the Corvette Lake Lithium Camp, Eeyou-Istchee Baie-James territory in the Quebec North region. The company encountered anomalous lithium on the Jarnet 2 and Corvette claim blocks.

Several intervals of anomalous lithium were identified within pegmatite dykes.

On the Jarnet 2 claim blocks, samples from JAR25-014 (at the northern extent of the Prince Zone) and JAR25-015, which were oriented to test an over 200m wide series of pegmatites, both intersected anomalous lithium.

JAR25-014 intersected 1.56m grading 5781ppm (~0.57%) lithium at a depth of 54.7m.

JAR25-015 intersected 1.5m grading 2224ppm (~0.22%) lithium at a depth of 212.06m.

On the Corvette claim blocks, samples from JAR25-029, JAR25-030 and JAR25-031 were oriented to test around the contacts between greenstone and peridotite and also intersected anomalous lithium. The three mineralized intersections are a series of parallel dykes.

JAR25-031 intersected 1.14m grading 5861 (0.58%) lithium at a depth of 84.86.

JAR25-030 intersected 0.50m grading 1278ppm (~0.12%) lithium at a depth of 73.5m, 0.50m grading 5841ppm (~0.58%) lithium at a depth of 130.24m, and 0.57m grading 2276ppm (~0.22%) lithium at a depth of 203.71m.

Several intervals of anomalous REE elements and base metals, such as nickel, copper and molybdenum, were also identified.

According to Mark Ferguson, President and CEO of Arbor Metals Corp., the company is pleased with the results, as they demonstrate that the Jarnet Lithium Project has the potential for high-grade lithium in two distinct areas: Jarnet 2 and Corvette. Ferguson added that the company is undertaking a comprehensive data study of the results to refine future diamond drilling programs.

The company expects its assay results from its Fall 2025 bark sampling program, which was conducted at the Corvette clam block around recent drilling, in Q1 of 2026.

The Phase 3 drilling campaign saw the completion of 10 NQ holes, with a combined drilling length of 2,451 meters. Drilling depths ranged from 137 meters to 462 meters, with approximately 572 samples collected during the program including QA/QC samples. The drilling program was carried out by Muskw Drilling, a local joint venture with the Cree community.

The majority of drillholes encountered numerous pegmatite dykes hosted either by granitoids or gneissose sediments and volcanics. In general, pegmatites were 0.5m to 2.0m in width (to maximums of 23.56m and 36.67m, both in JAR25-032) and constituted about 10% of each drillhole length on average. Pegmatite intervals could reach thicknesses of 10m, up to a maximum of 46.84m in JAR25-019. JAR25-033 passed through a gneissose mafic unit and did not see any pegmatites.

Drill core assay results indicate the presence of localized lithium and rare earth element enrichment; however, Li-enrichment and REE enrichment are not spatially or geochemically coupled. Lithium values are highly variable, ranging from background levels (<50ppm) to locally elevated values up to 5861ppm Li. The distribution of Li values is strongly skewed, with a small number of very high-Li intervals which occur in individual samples, suggesting localized Li enrichment in zones of highly evolved magmatic differentiation in pegmatites or late-stage granitic phases.

Additionally, several samples with high Li values are associated with elevated Cs, Rb, Ta and Nb, consistent with LCT-type pegmatites.

REE values show a strong LREE dominance, rather than HREE, typical of fractionated felsic systems and suggests control by accessory mineral phases, such as monazite and allanite.

There does not appear to be any meaningful correlation between elevated Li values and REE values, indicating that Li and REE mineralization is controlled by different mineral phases and / or distinct stages of magmatic evolution or fractionation.

Samples were delivered to SGS Laboratories, and arms-length laboratory in Val d’Or, and were analyzed using “GE_ICP90A50 & GE_IMS90A50 Sodium Peroxide Fusion / Combined ICP-OES and ICP-MS Package”. Sampling was done without crossing lithological boundaries. Quality control blanks and standards were added during the core logging process, including quartz blanks and CDN-Li-1 and CDN-Li-2 standard reference materials.

Francis R. Newton, PGeo, a consultant to Arbor and a qualified person under National Instrument 43-101, has reviewed and approved the technical contents of this release.

Arbor is committed to conducting all of its exploration activities with a strong focus on environmental stewardship and works collaboratively with local indigenous groups and other stakeholders.

Arbor Metals Corp. is focused on developing high-value, geographically significant mineral projects worldwide.

The Jarnet, Corvette Lake and St. Pierre lithium projects, located in the James Bay region of Quebec, comprises 83 map-designated claims, covering an area of approximately 5,606 hectares. The projects are contiguous to the Corvette-FCI property.

The Kemlee Lake Lithium project is strategically located three kilometers east of Rock Tech Lithium Inc.’s Aumacho claim blocks and twelve kilometers south of the Georgia Lake Project. The Project shares many geological similarities with the Georgia Lake deposit.

For further information, contact Mark Ferguson, Chief Executive Officer, at info@arbormetalscorp.com, or 403.852.4869.

Mark Ferguson, Chief Executive Officer

info@arbormetalscorp.com

403.852.4869

Source: Arbor Metals Corp.

×

Welcome!

Biotech Reporter is the source most up-to-date real-time, direct-from-source News Tips and Story Leads.

By Subscribing you will receive Daily Biotech Update each day at 9:30 am ET (Market Open) in your inbox and you can unsubscribe any time.